BJJJK - COATING, EPOXY-POLYAMIDE CLEAR, COMP 2

  • MSDS: BJJJK
  • Manufacturer: STRATHMORE PRODUCTS INC
  • Product Name: COATING, EPOXY-POLYAMIDE CLEAR, COMP 2
  • National Stock Number: 8010-01-167-4602
Product Identification

Product ID:COATING, EPOXY-POLYAMIDE CLEAR, COMP 2
MSDS Date:07/03/1990
FSC:8010
NIIN:01-167-4602
Kit Part:Y
MSDS Number: BJJJK

Responsible Party
STRATHMORE PRODUCTS INC
1970 W FAYETTE STREET
SYRACUSE, NY 13201
US

Emergency Phone: 315-488-5401, 315-476-4766

Info Phone: 315-488-5401

Cage: GO043

Contractor
STRATHMORE PRODUCTS INC
151 SYRACUSE, NY 13201 US

Telephone: (315) 488-5401 OR (315) 476-4766

Cage: GO043

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15.00%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 15.00%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 29.00%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 19.0%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 2.00%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


FREQ CONTACT MAY RESULT IN ABSORP OF

RTECS: 9999999ZZ


TO INCREASE OSMOTIC FRAGILITY OF BLOOD CELLS IN SOME LAB

RTECS: 9999999ZZ


THESE BLOOD EFFECTS DID NOT OCCUR AT ALL.(MFR)EFTS OF

RTECS: 9999999ZZ


TO VAP MAY AFFECT CNS & CAUSE RESP IRRIT,& MAY CAUSE LIVER

RTECS: 9999999ZZ


OVEREXP TO SOLVENTS W/PERM BRAIN&NERVOUS SYS

RTECS: 9999999ZZ


MAY BE HARMFUL IF ABSORB THRU SKIN.RPTD/PRLNG SKIN

RTECS: 9999999ZZ


NIOSH STUDIES INDICATE BUTYL CELLOSOLVE HAS CAUSED REPROD


FOR CAUSING SIMILAR DISORDERS IN HUMANS .

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE(SHORT TERM)OVEREXPOS:INHAL OF
VAP/SPRAY MISTS CAN CAUSE IRRIT OF RESP TRACT/ACUTE NERVOUS SYS
DEPRESS CHARACT BY HDCH,DIZZ,STAGGERING
GAIT,CONFUSN,UNCON/COMA.OVEREXPOS TO VAP/SPRAY MISTS CAN CAU SE
EYE&SKIN IRRIT.EYE:MAY CAUSE SEV IRRIT.INGEST:HARMFUL IF SWALLOWED.
(SEE BELOW)
Explanation of Carcinogenicity:THIS PRODUCT DOES NOT CONTAIN 0.1% OR
MORE OF ANY SUBSTANCE WHICH IS LISTED AS A CARCINOGEN BY NTP,IARC
OR OSHA.
Effects of Overexposure:HLTH HAZ:INGEST:CAN CAUSE GI
IRRIT,NAUS,DIARR&POSSIBLY VOMIT.ASPIR OF MATL IN LUNGS CAN CAUSE
PNEUM WHICH CAN BE FATAL.BUTYL CELLOSOLVE(2-BUTOXYETHANOL)
UNDILUTED IS TOX IF INGEST,&WILL PENETRATE SKIN READILY.INGEST OF
LG QTYS MAY RESULT IN RBC HEMOLYSIS. (SEE INGRED 6)
Medical Cond Aggravated by Exposure:A CASE EFFECT SHOWED ACTIVE LIVER &
KIDNEY DYSFUNCTION AT EXTREMELY HIGH LEVELS OF EXPOS TO XYLENE AND
TOLUENE.EXPOS MAY AGGRAVATE PREEXISTING SKIN,EYE,AND RESPIRATORY
DISORDERS.

First Aid

First Aid:FUMES:REMOVE FROM EXPOS,RESTORE BREATHING.KEEP WARM AND
QUIET.NOTIFY A PHYSICIAN.SPLASH(EYES):FLUSH IMMED WITH COPIOUS
QUANTITIES OF WATER.TAKE TO A PHYSICIAN FOR DEFINITIVE MEDICAL
TREATMENT.SPLASH(S KIN):WASH AFFECTED AREA WITH WATER.REMOVE
CONTAMINATED CLOTHING.CONSULT A PHYSICIAN.IF SWALLOWED,DO NOT
INDUCE VOMIT;CALL A PHYSICIAN OR POISON CONTROL CENTER IMMED.

Fire Fighting

Flash Point Method:SCC
Flash Point:34.0F,1.1C
Lower Limits:SEE INGRED.
Extinguishing Media:NATL FIRE PROT ASSOC NFPA CLASS B EXTING(CARBON
DIOXIDE,DRY CHEM/ALCOHOL FOAM)DESIGNED TO EXTING NFPA CLASS 1B LIQ
FIRES
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVT SCBA&FULL PROT
EQUIP.H*20 MAY BE USED TO COOL EXPOS CNTNRS.APPLY H*20 SPRAY W/FOG
NOZZLES.
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLOSED.ISOLATE FROM
HEAT,ELEC EQUIP,SPARKS&OPEN FLAME.CLOSED CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.DO NOT APPLY TO HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT(FLAMES,HOT
SURFACES&ELEC,STATIC/FRICTION SPARKS).AVOID BREATHING VAP.VENTILATE
AREA.REMOVE W/INERT ABSORBENT&NON-SPARKING TOOLS.TRANSFER TO APPROP
CONTAINER FOR DISPOSAL.KE EP OUT OF SEWERS,STORM DRAINS,SURFACE
WATER&SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
QUANTITIES IN BUILDING DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:CONTRS SHOULD BE GROUNDED WHEN POURING.AVOID FREE
FALL OF LIQ IN EXCESS OF A FEW INCHES.DO NOT FLAME-CUT,BRAZE OR
WELD WITHOUT MSHA/NIOSH APPROVED RESP OR APPROP VENT.FLAMM,VAP
HARMFUL.MAY CAUSE IRRIT .OBEY ALL LABEL WARNINGS.(SEE SUPP DATA)

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS NIOSH/MSHA APPRVD MECH FILTER
DESIGNED TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
SPRAY APPLIC.IN RESTR VENT AREAS NIOSH/MSHA APPRVD CHEM-MECH
FILTERS.CONFINED AREAS USE NIOSH/MSHA APPRVD AIR LINE RESP/HOODS.
Ventilation:GEN DILUT/LOCAL EXH TO KEEP TLV/LEL PROD DURING WELDING/FLAME CUTTING&SURFACES.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WRKRS GOGGLES,FACESHLD OPTNL.
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
SANITARY FACILITY .
Supplemental Safety and Health
OTHER PREC:AVOID HEAT,SPARKS,OPEN FLAME.ADEQ VENT.AVOID BRTH VAP/SPRAY
MIST,CONTACT W/EYES&SKIN.DO NOT TAKE INTERNALLY.RPTD&PROLONGED
OCCUP OVEREXP TO SOLV W/PERM BRAIN&NERVOUS SYS DMG.INTEN MISUSE BY
DELIB CONC MAY BE FATAL.EMPTY CONTR MAY CONTAIN PRODUCE RESIDUE
INCL EXPLO VAP.DO NOT CUT,PUNC,WELD NEAR CONTR.

Chemical Properties

Boiling Pt:B.P. Text:175F,79C
Vapor Pres:SEE INGRED
Vapor Density:>AIR
Spec Gravity:0.87
Evaporation Rate & Reference:Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:80.7

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:ACRID FUMES, SMOKE AND CARBON MONOXIDE
AND/OR CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.